8 800 700 82 21
Техническая документация и файлы
СкачатьИнструкции:
Конфигуратор UMKa301
Конфигуратор аппаратной платформы для мониторинга транспорта УМКа3хх - это автономное программное обеспечение, которое позволяет проводить удаленную настройку терминалов УМКа301, датчиков уровня топлива и выполнять тарировку топливного бака при помощи терминала с формированием паспорта процедуры.
Скачать
Инструкция «Удаленная настройка ДУТ Эскорт»
Инструкция «Мастер тарировки»
Инструкция «Удаленное конфигурирование терминалов УМКа3xx»
Конфигуратор UMKa301. История изменений 
1.21.0 - 24.09.2021
[+] Добавлены настройки редактора скриптов.
[+] Добавлен поиск с заменой в редактор скриптов.
[+] Поддержка ДУТов Italon.
[+] Экспорт истории терминала в форматы Wialon(wln) и MS Excel (xlsx).
[*] Исправлена проблема обновлений УМКа302 со старыми прошивками.
[*] Обновлены настройки страницы "Фотокамера".
[+] Добавлена поддержка УМКа303 в редакторе скриптов.
1.18.4 - 26.02.2021
[+] A satellite search waiting timer has been added to the calibration wizard, and you can start calibration if you have a GSM network.
[*] Changed the CSV file in the tare master of the DUTs, added full information on the DUTs and the type of tare.
[*] Fixed the configuration entry from the saved file.
[*] Fixed editing of phone number lists.
[*] Fixed an issue with editing server settings.
1.17.8 - 29.12.2020
1.17.5 - 16.12.2020
1.17.3 - 8.12.2020
1.15.6 - 21.10.2020
[+] Added a page with camera settings.
[ + ] Added parity settings on the Interfaces page.
[+] The "Mechanical Flow Meter" and "Diff" types have been added to the input settings. Mechanical flow meter "
[ + ] The contact rattle setting has been added to the input settings.
[ + ] Added support for ELA Blue Coin T and TESLiOT BLE sensors.
[+] Added new data types to the CAN filter.
1.14.5 - 10.09.2020
[+] Added support for tachographs.
[+] Updated the English translation.
[+] Added support for UMKa312.
[+] Added iBeacon beacons to the Status page.
1.13.1 - 18.08.2020
1.13.0 - 9.07.2020
1.10.4 - 6.05.2020
[+] Analog and frequency DUT and input range settings have been added to the input settings;
[+] Added the "BLE Sensors" page with BLE sensor settings and display of current parameters;
[+] Updated the status calculator. Now, by clicking on the status code, the calculator opens with the current status display, and by clicking on the "Status Calculator" button, the decryption tool opens;
[+] Added decryption of the modem's current status to the status calculator.
1.9.11 - 10.03.2020
1.9.7 - 28.01.2020
[*] Fixes when the configuration is read from УМКа310.B without the BLE option.
[*] Fixed status reading when connecting UMKa310 after UMKa30x without restarting the Configurator.
[+] In the context menu of the table of found BLE devices, the MAC address setting for ble FLSs has been added.
1.9.4 - 17.01.2020
[+] A query for LBS data has been added to the tare Wizard.
[+] Added support for ble FLSs.
[+] Added ble device scanner.
[+] Added display of the progress bar when searching for Bluetooth devices.
[+] Added mask for entering MAC addresses of ble FLSs.
[+] Redesigned the main command parser, improved speed.
[+] Improved English translation.
[*] Fixed data request error with FLS TD-150.
[*] On the "CAN-LOG" and "iQFreeze" pages, the display of transfer parameters to the server has been fixed.
[*] Other bugs fixed.
1.8.4 - 25.11.2019
[+] Added multi-command support for UMKa310.
[*] Fixed resetting parameters when updating the FLS firmware.
[+] The serial number and IMEI of the tracker is now displayed before entering the password.
[*] Fixed an error displaying the FLS readings when the fuel temperature is negative.
1.8.0 - 11.11.2019
[+] Added work with multi-commands for UMKa3xx trackers, which speeds up the process of reading the configuration from the tracker.
[+] The line wrap option has been added to the console.
[+] Now important statuses are highlighted in bold, and a description of statuses is added when the mouse cursor is hovered over.
[+] The thermal compensation setting has been added to the FLS configuration.
[+] Added the ability to update the FLS firmware.
1.7.2 - 20.09.2019
[+] Added the "GNSS monitor" page, which displays information on satellites, their location and signal quality, for monitoring during installation and debugging.
[+] Added setting the value empty/full to the "FLS" page.
[*] Adjustments were made to the procedure for checking the FLS firmware version in the "calibration Wizard".
1.7.1 - 12.09.2019
[+] Selection of the range of FLS values in the "calibration Wizard"is implemented.
[+] Added display of FLS levels in the "calibration Wizard".
[*] Other fixes and updates.
1.7.0 - 10.09.2019
[+] New mobile operator profiles have been added.
[+] On the "SIM cards" page, the "Switching SIM cards" setting has been added with the "mode" and "Interval" parameters.
[+] On the Navigation page, the Dynamic angle parameter has been added to the route drawing Quality setting.
[+] On the Navigation page, the "track Smoothing" setting with the "filter Coefficient" parameter has been added.
[+] Added the "Scripts" page that allows you to manage user scripts and settings for sending their parameters to the servers.
[+] HDOP display on the information panel is implemented.
[+] Reworked the setting for remote FLS smoothing.
[+] Updated the mechanism for requesting data from FLS in the "calibration Wizard" , now the serial number and model of FLS is filled in automatically. "Smart" and "Median" smoothing modes are supported.
[+] The empty/full setting has been added to the FLS setup.
1.5.13 - 11.07.2019
[+] Added the "Manage power saving modes" setting.
[+] Added the "activity window Settings" setting. (Settings are available on trackers with firmware versions from 0.17.x for UMKa310 and from 1.7.x for UMKa300/301).
1.5.6 - 22.04.2019
[+] Added the ability to read history from the black box in the selected range.
[*] The output control function of the UMKa310 tracker becomes active only when the port is configured as an output.
[*] Fixed UMKa310 connection error after reboot.
1.5.4 - 27.02.2019
[+] The function of editing the previously saved tracker configuration without connecting it is implemented.
[+] Additions have been made to the Help algorithm. Clicking the button opens the current manual or a page with information about the tracker by default
— if you have Internet access. Otherwise, the folder with the last saved manual will open.
[+] Support for configuring the UMKa301 via Bluetooth has been completed.
[+] Automatic download of the latest firmware versions of the tracker is implemented, regardless of its connection.
1.5.2 - 15.02.2019
[+] Added a request for the firmware version and FLS serial number (on the " FLS " page).
[+] Automatic port selection for Wialon and Orange servers depending on the connected device (on the "Servers" page»).
1.5.1 - 11.02.2019
[+] The UMKa310 driver with automatic installation has been added to the update system.
[+] Updated manual for the UMKa310
[+] Improved stability of the process progress indicator.
1.5.0 - 06.02.2019
[+] Added support for UMKa310 trackers.
[+] Added configuration via Bluetooth (if enabled). Bluetooth radio module).
[+] The function of enabling and disabling Bluetooth configuration is implemented
[+] The function of setting the LBS transmission parameter and vibration level is implemented
1.3.13 - 15.11.2018
[+] Optimization of calibration reports.
1.3.10 - 01.11.2018
[+] Added "ESCORT"anti-aliasing control.
1.3.9 - 24.10.2018
[*] Fixed an error loading the update via FTP.
[+] Updated the calculation of Straits in the tare wizard.
[+] Added iQFreeze configuration functionality.
[+] Changed the setting of accelerometer triggers before exiting static navigation.
1.3.5 - 19.09.2018
[*] Fixed additional server Protocol selection.
1.3.4 - 13.09.2018
[+] The process of updating the Configurator has been accelerated.
[+] Added algorithms for tare types and other minor changes.
[+] Changed the process of getting an update. Now the update is downloaded from the server via FTP. If the FTP server is not available for any reason, the update is downloaded as before.
1.3.3 - 10.09.2018
[+] In the tare wizard, algorithms for the "average" and "total" tare types have been added.
[+] Graphs have been added to the tare passport.
[+] Added confirmation of completion of the calibration.
[*] Fixed a bug about the values of the fuel level sensors in the fuel leakage.
1.3.1 - 23.08.2018
[+] Added auto-saving of calibration results.
1.3.0 - 21.08.2018
[+] Added support for the third server.
[+] The calculator of the status bits can be assigned a priority of events.
[+] Added 1-Wire address assignment.
[+] Added support for the third server status.
[*] Fixed errors in the tank calibration wizard.
1.2.1 - 06.08.2018
[+] Depending on the selected language, the corresponding guide opens.
[*] Minor language changes to the Configurator.
[*] English has been added to the instolator.
1.2.0 - 04.07.2018
[+] Tank calibration is implemented.
[+] Added course support in the information panel.
[*] Fixed a Protocol installation error.
1.1.1 - 19.06.2018
[*] Fixed a saved configuration error.
1.1.0 - 05.06.2018
[+] Added multilingual support.
[+] Added support for remote configuration.
[*] Updated graphics.
[+] Support for new statuses (12, 19, 20) has been added to the status bit calculator.
[*] Changed the status bit calculator to display only firmware-supported statuses.
[+] Icons for alternate telemetry server status and configuration server status have been added to the statusbar.
[*] Changed the SETPROTOLOC command, since firmware version 1.1.6 has two parameters.
[+] On the "System" page, a setting has been added to enable permanent connection to the remote configuration server.
[*] Other minor fixes and improvements.
1.0.3 - 11.04.2018
[*] Fixed a critical error in the configuration file reading function that caused parameters to be loaded incorrectly.
1.0.2 - 02.04.2018
[+] On the "Servers" page, a selection of the EGTS protocol has been added to the "Protocol" setting.
[*] Fixed a memory leak when the app is running for a long time, and increased the speed of the app.
[*] Fixed a bug with the window "flying out" of the screen when moving it quickly.
1.0.1 - 06.03.2018
[+] Added time setting for switching to idle and standby modes for static navigation.
[+] Added setting to enable/disable tracker display.
[+] Added setting the storage location of the black box.
1.0.0 - 10.01.2018
[+] Added settings for transmitting power and battery voltage.
[+] Added backup power setting.
[*] Fixed the inability to set an empty tracker name.
[*] Fixed checking of RFID reader address ranges.
0.9.10 - 20.12.2017
[+] Added IMEI number polling.
[+] Added setting the maximum size of the transmitted packet.
[*] Now if the apn of the internet operator is displayed in the drop-down list, the megaphone is displayed.
[+] Added a request to confirm password changes.
0.9.9 - 14.12.2017
[+] Added MAXHDOP and SATHDOP settings.
[+] Added support for RFID readers.
[+] Added setting of the virtual odometer.
0.9.8 - 28.11.2017
[+] Added support for setting up the transfer of the number of records to the server.
[+] The Wialon server port with UMKa301 support has been added to the list of monitoring servers.
[+] Added sorting of lists of mobile operators and monitoring servers.
[*] Fixed a bug that in some cases caused the Configurator to hang when writing the configuration.
[*] Fixed the logic of the "Accept from any numbers" checkbox.
0.9.7 - 10.11.2017
[+] Support for receiving UMKa301 firmware from the update server.
0.9.6 - 26.10.2017
[+] Added support for UMKa301 voice communication.
[+] Added bit 15 (SOS) to the status calculator.
[+] Added decimal and hexadecimal modes to the status calculator.
[+] Visual display of some statuses has been added to the Configurator.
[*] Added borders for input fields, checkboxes, etc.
[*] Temporarily added a "crutch" for downloading firmware for UMKa301.
0.9.5 - 17.10.2017
[*] Adding digital input types to the database now without editing the code.
[+] The dialog box for restarting/updating the tracker firmware is now closed automatically.
[*] Minor fixes in the GUI.
[*] Fixed a bug where the Configurator offered to update again after updating the firmware.
[*] Fixed the behavior of opening help, now if there is more than one file in the help directory, a more recent one will open.
0.9.4 - 05.10.2017
[+] In the status calculator, the setting of the mask for sending extraordinary events has been added.
[+] Added the option to send RSSI to the server.
[+] Added an extended "Transparent mode" setting on the Interfaces page.
[+] Added support for the hosting option.
[*] Fixed the problem of running the Configurator for a long time if there is an unavailable network disk in the system.
[*] Changed the tracker log entry, now it is enabled and disabled in the console context menu.
[*] Input commands are also written to the tracker log file.
0.9.3 - 03.10.2017
[*] Added the "Save as binary file" option to the console context menu.
0.9.2 - 12.09.2017
[*] Fixed an error when exiting debug mode.
[*] Spelling corrected.
0.9.1 - 04.09.2017
[+] Added control of output of debugging information of the subscriber tracker.
0.9.0 (21.08.2017
[+] Added the "Interfaces" page where RS-485 and RS-232 interfaces are configured.
[*] The "RS-485" page has been renamed "Douts".
[+] Added support for CAN-LOG.
0.8.9 - 01.08.2017
[*] Settings for additional data sent to the server are transferred to the SERVER page.
0.8.8 - 30.06.2017
[+] Added option for uploading data to the server.
[+] Added DFM and VZP in the input settings.
[+] Added settings for additional data sent to the server.
[+] Added display of internal thermometer and accelerometer.
0.8.7 - 31.05.2017
[+] Added a command to select the monitoring server Protocol.
[+] Added a command to enable/disable roaming on SIM cards.
[+] Added a command to enable/disable roaming on SIM cards.
0.8.6 - 05.05.2017
[+] When the Configurator is shut down, a warning message is displayed about a configuration that has not been saved/recorded.
[*] Updated the user guide to version 1.5.
0.8.5 - 26.04.2017
[+] Added 1-wire interface status display.
[+] Added accelerometer support.
[*] Information about the state of the FLSs has been moved to the state page.
0.8.0 - 06.04.2017
[+] The new design of the Configurator.
0.7.0 - 03.04.2017
[+] Added digital input modes "OSS" and "frequency Meter"
[+] Added statuses for USB connection and connection to the update server.
[+] Added selection of GPS navigation services from the list.
[*] Lists of GPS services and GPRS settings have been moved to the database.
[*] Switching to the Qt5 library in connection with the start of work on the Configurator's graphical interface.
0.6.7 - 23.03.2017
[*] The "counting" mode of digital inputs is renamed to " flow Meter"
[+] Added digital input mode "Differential flow meter"
[+] Added support for firmware 0.4.17
0.6.6 - 20.03.2017
[*] Improved stability of exchange with the tracker. Fixed a memory leak in the parser.
0.6.5 - 16.03.2017
[+] Added the state of the output tracker.
[+] Added control of the OUT0 tracker output.
[*] The status bar on the console and FS pages is hidden.
[*] The GSM signal level has been moved to the status panel.
0.6.4 - 15.03.2017
[*] Improved output of debug messages to the console.
[+] Added the ability to write block files to the FS.
[*] Changed the highlighting of previously entered commands in the console.
[*] Minor fixes in the main configuration parser.
[*] Tracker statuses have been moved to the database.
[+] If the tracker firmware version is not supported by the Configurator, only the console is available.
[*] Passwords in input fields are hidden by asterisks.
[+] Display / hide the FS item by keyboard shortcut.
[+] Save the console log to a file from the console context menu.
[*] The clear console button has been moved to the console context menu.
0.6.3 - 13.03.2017
[+] Added a database with firmware dependencies.
[*] Fixed the progress bar in block file reading mode.
0.6.2 - 07.03.2017
[*] Fixed a bug that caused the Configurator to not always go to the "waiting for tracker connection" state when the device was disconnected.
0.6.1 - 02.03.2017
[+] Added ability to work with a team of INSTATIC.
[*] Fixed fonts.
[+] FS logout when closing the Configurator.
0.6.0 - 01.03.2017
[*] The implementation of the work with the tracker inputs
0.5.5 - 27.02.2017
[*] Fixed receiving updates from the server.
[+] Fixed receiving updates from the server.
[+] Added the cleanup menu to the debug output window.
0.5.4 - 22.02.2017
[-] Removed c_updater. Now all work with updates takes place inside the Configurator.
[*] Refactoring the code for working with the update server.
[+] The status bar shows the exchange process with the server.
0.5.3 - 20.02.2017
[*] Changed the help call. Now a pdf file from the help directory opens.
[+] Attached re file version 1.0.
[*] In c_updater, the update installation script has been corrected.
[*] The update script is taken out of the post code and stored in the archive with the updated program files.
0.5.2 - 17.02.2017
[+] The first version of the Configurator for public use.
Данные об устройстве
Тех. характеристики устройства
|
Number of GLONASS/GPS receiver channels |
32 |
|
Communication Standard |
GSM 900/1800, GPRS Multi-slot Class 12 |
|
Analog/discrete inputs |
2 |
|
Pulse/discrete inputs |
2 |
|
Output (type) |
“Open collector” |
|
Interfaces |
RS-485, 1-Wire, Bluetooth |
|
Additional interfaces |
RS-232, CAN |
|
Black box capacity |
Up to 10 0000 points |
|
MicroSD capacity |
Up to 100 000 000 points |
|
Number of SIM cards |
2 |
|
Configuration |
USB, SMS, GPRS, Bluetooth |
|
Power supply voltage |
+8... +40 V |
|
Antenna type |
Internal or external |
|
Intelligent power management |
Yes |
|
EGTS protocol support |
Yes |
|
Supplementary power supply |
Optional |
|
Voice communication |
Optional |
|
Dimensions (bracketry included) |
71х107х32 mm |
|
Max weight |
120 g |
|
Ingress protection rating |
IP54 |
- Подключение устройства
- Область применения
- История обновлений
- Описание выводов
Install the required units according to the list, configure and register the device. Detailed installation description for each unit is given in the Operating Manual (OM).
- Install the SIM card into the tracker (OM, p. 12).
- Install the device in a vehicle following the instructions (OM, p. 14).
- Connect power supply (OM, p. 15).
- Connect the analog input (OM, pp. 16-17).
- Connect the digital input (OM, p. 18).
- Connect the “Open collector” output (OM, p. 19).
- Connect the RS-485(FLS) (OM, p. 20).
- Check the device status LED-indicators (OM, p. 26).
- To operate and configure the device use the “Configurator” program (OM, pp. 27-45).
- Register the device on the GLONASSsoft software platform or the platform you use.
Start using the device!
Manuals:
UMKa301 trackers are installed on vehicles and other monitoring objects to register the location, speed and direction of their movement. Additionally, parameters such as the status of analog and digital inputs and readings of connected sensors are recorded. Discrete output allows you to remotely control external equipment through the tracker using GPRS or SMS commands.
The route of the vehicle movement is recorded in the form of individual points in which all information arriving at the terminal from internal sensors and additional equipment is recorded.
The data recorded by the terminal is stored in non-volatile memory and sent using GPRS packet data technology via a GSM network to a dedicated server, where it is available for further analysis and processing on dispatchers' control panels via the Internet.
UMKa300/301 tracker firmware changes:
2.12.6 - 3.08.2020
- Support for RFID readers EXZOTRON ERF01.
- New and changed commands.
- New parameters.
- New access points.
2.11.5 - 16.06.2020
- Improved the work of the Black Box.
- Improved navigation accuracy.
- Improved module that connects to the hosting protection server.
- Improved remote configuration module.
- Redesigned remote update module.
- When working with Thrimble guides, the best confidence flag between RMC and GGA packages is selected.
- Added a simplified 1-Wire operation mode for working with Matrix-II readers and the like.
- Fixed bug with 1-Wire temperature transmission in IPS protocols.
2.9.12 - 28.04.2020
- Implemented the Filter of FLS values;
- Integration with 4 new BLE sensors;
- Added new modes for analog and digital inputs;
- Detector of drains and refills for correct filter operation;
- New and changed commands.
2.8.4 - 5.03.2020
- Improved terminal performance;
- New and changed commands;
- New parameters.
2.6.3 - 01.20.2020
- For the EGTS protocol, the transmission of several points in one packet is implemented;
- Reduced traffic consumption and increased data transfer rate for the EGTS protocol;
- Other fixes and improvements.
1.7.4 - 17.07.2019
- Added synchronization time by NTP server.
- Enhanced capabilities of the «power manager».
- Added 2 new commands (VOLTSAVE, ACTIVEWIN);
- Implemented the ability to operate the terminal as a «beacon»;
- Increased the size of the transmitted data from 24 to 64 bytes For the S485 command.
1.6.2 - 22.04.2019
- Added support for the Can-Log binary protocol. The type of protocol used (text P145 or binary X022) is determined automatically;
- Added the ability to remotely configure trackers via Bluetooth;
- Added adaptive algorithm for selecting 1-Wire bus speed;
- Introduced the re-initialization algorithm of the GNSS module «on the fly» in case of the main power cut-off, and crashes or reboot of the module;
- Fixed assignment of the status of a faulty battery during its physical disconnection.
1.4.28 - 31.01.2019
- Implemented new commands «BBOX» and «HISTORY» for working with the history of black box;
- Implemented an additional geolocation function via mobile stations (LBS);
- Implemented new transmitting data function about vibration level from the accelerometer to the server;
- The fuel level data range with FLS expanded from 0-4095 to 0-32767;
- Fixed formatting algorithms for SD cards and battery detection;
- For trackers with an opening alarm button, power consumption in the closed state is reduced;
- Adjusted the list of commands In accordance with programmatic changes;
- Added parameters to IPS and Combine protocols: vibration level, mobile country code, mobile network code, local area code, cell ID.
1.4.16 - 02.12.2018
- Implemented the t ° data transfer from the tag UMKa-100;
- Added «Disabled» mode for all tracker inputs;
- Implemented the transfer of iButton ID without continuous physical contact;
- The «TRACK» command is supplemented with the parameter - minimum distance between points when moving;
- Implemented the formation of a point with a disabled GNSS receiver;
- When the tracker is turned on, all the LEDs light up for 2 seconds;
- Implemented the mandatory function of accelerometer self-diagnosis;
- Adjusted the list of SMS commands In accordance with the updates;
- Fixed error using IMEI from an inactive SIM card;
- Fixed error processing data from the GNSS module at an altitude of more than 1000 m;
- Fixed a bug in the Base64 library which caused crashes during firmware updating.
1.4.3 - 12.10.2018
- Implemented iQFreeze support;
- Implementation of the EGTS protocol has been finalized;
- 1-Wire is adapted to work on lines with high capacity;
- Improved overall stability of connection to telematic servers;
- Added control commands.
1.3.3 - 23.08.2018
- Data transfer to 3 telematic servers;
- Added high priority events;
- Extended list of analog and digital inputs modes;
- Fixing the addresses of temperature sensors on the 1-Wire bus;
- Added additional commands for selecting protocols and servers, operating modes of inputs, etc.;
- Minor improvements and bug fixes.
1.1.8 - 18.06.2018
- Implemented data transfer to 2 servers;
- Implemented remote configuration;
- Implemented firmware update without disconnecting from telematic servers;
- Added commands: «REMCFG», «SU»;
- Expanded the list of transmitted parameters for the EGTS protocol;
- Changed display patterns for the yellow LED;
- Extend the receive buffer from the navigation module;
- Minor improvements and bug fixes.
1.0.0 - 02.04.2018
- Improved power manager, optimized power consumption;
- Implemented basic support for the EGTS protocol;
- Implemented LED control;
- Implemented recording of black box onto a SD card;
- Minor improvements and bug fixes.
0.14.3 - 12.01.2018
- Added «power manager», optimized power consumption of the tracker;
- Added fast battery charging mode;
- Added the command to determine the SIM card number;
- Added support for the ADM20 reader;
- Added support for a «virtual» odometer;
- Added support for Trimble EZ-Guide 250 (or similar);
- Added new commands «CHARGE», «DISCHARGE», «SETEXT», «SETAKB», «GNSSTIME», «SENDSMS», «SETRFID», «RFID», «SETODM», «ODM»;
- Error correction.
0.12.16 – 18.12.2017
- Implemented a packet transfer of points recorded in black box;
- Implemented the «GNSS Signal Suppression Detector» function;
- Added commands «TRAFFIC», «ICCID», «S485», «MAXHDOP», «SATHDOP», «UPDATE VER», «NAVMODULE»;
- Disabled automatic updates. Update only by command;
- Improved reliability of communication with the server;
- Reduced the number of points in the formation of the track without losing the quality of drawing;
- Improved SMS commands module;
- Error correction.
0.11.1 – 25.10.2017
- Added voice support in UMK301. UMK-301 can receive incoming and outgoing voice connections;
- Added support for the DS18S20 thermometer connected via 1-Wire bus.
0.10.8 – 12.10.2017
- Added hosting support;
- Excluded transmission of Keep-Alive packets
- The modem status is now updated every 15 seconds, and not after the transmission of the Keep-Alive packet;
- The modem registration flag in roaming is set immediately after registration in the guest network. This will fix the fact of registration in the guest network in black box;
- Added the GNSS receiver control commands.
0.9.14 - 26.09.2017
- Disabled auto update. Update available only on command;
- Disabled QZSS satellite constellation;
- Added commands «GNSSMODE», «GNSSRESTART», «GNSSMONITOR»;
- Improved reliability of communication with the server;
- Added support for the DS18S20 thermometer.
0.9.2 – 12.09.2017
- Error correction.
0.9.0 – 18.08.2017
- Implemented RS-232 interface support in the firmware;
- Implemented support for CAN-LOG P145 series;
- Additional commands introduced.
0.8.4 – 19.07.2017
- Changed the list of available pulse input modes which is set by the SETINPUT2 and SETINPUT3 commands;
- Added support for the «SERIAL» command which sets the order of uploading data from the black box onto the server;
- Added support for UMKa301;
- Other improvements and fixes.
0.7.3 – 30.05.217
- Added support for the Wialon Combine binary protocol and Wialon IPS v2.0 text protocol;
- Added commands «ROAMING0 X» and «ROAMING1 X»;
- The system clock of the tracker is synchronized with the time received from the GNSS module;
- Error correction.
0.6.3 – 02.05.2017
- Added the «LLSSTAT» command which returns statistics of exchanges between the tracker and the FLS in the current session of the tracker.
0.6.0 – 02.05.2017
- Added support for the accelerometer and static navigation mode according to the accelerometer;
- Added support for 1-Wire bus;
- Error correction.
0.4.22 – 03.04.2017
- Added support for SPD through two channels;
- Added frequency meter mode for counting inputs;
- To reduce the likelihood of a conflict the tracker is no longer connected to the update server while it is connected to the computer via USB;
- The «status» parameter in the Wialon IPS protocol has been changed. Added states «Connected via USB» and «Connected to update server»;
- Added support for the «SPEEDALARM X» command;
- FLSs are natively pre-configured with addresses from 0 to 6.
0.4.17 – 23.03.2017
- Added support for the «STATMASK» command to configure extraordinary entries in the black box when changing the set status bits;
- Added support for differential flowmeter;
- Fixed problems with the stability of the black box and SMS;
- Increased the number of exchange attempts during the FLS survey from 2 to 6;
- Error correction.
0.4.8 – 16.03.2017
- If an error occurs while reading the list of incoming SMS, the incoming messages are cleared without trying to parse and execute them.
0.4.7 – 16.03.2017
- Implemented mode 3 (flow meter or pulse counter);
- Fixed bug with the implementation of the Omnicomm LLS protocol;
- Implemented discrete output support;
- Changed the «status» parameter in the WialonIPS protocol. Added Discrete output state;
- Reduced reaction time of the tracker to incoming SMS from ~ 2 minutes to 15 seconds;
- Improved remote update algorithm;
- Changed the display pattern of the yellow LED;
- Added the ability to view tracker debug messages via USB;
- In case of diagnosing problems with the black box from the side of the terminal software, the FLASH-memory is formatted.
0.4.2 – 28.02.2017
- Changed default settings
0.4.1 – 27.02.2017
- Added delayed start of the modem;
- Implemented static navigation mode («STATIC» mode) for parking without «stars»;
- Added basic battery support in the «Power Manager».
0.4.0 – 22.02.2017
- Added support for analog and digital inputs;
- Changed the recording format of the black box;
- Added additional parameters o the WialonIPS protocol data packet;
- Added initial support for the «power manager»;
- Added support for tracker status
0.3.1 – 13.02.2017
- The first release version;
Напишите нам
